installed! Matches the Hoodskinz we also sell!
Multiple orders may ship
together and extra shipping charges will be refunded. We
can also offer a package deal on shipping if you also order a
Hoodskinz at the same time.
HERE TO GO TO HOODSKINZ PAGE
plastic rivet style
ORDER UNTIL FURTHER NOTICE!
EMAIL US FIRST AT FOR AVAILABILITY email@example.com
Here is another new product we are now selling from the
makers of the HOODSKINZ we have been selling. These
constructed from 18 ga aluminum and then are powder coated
black. The silver colored graphics you see in the pictures
is the bare aluminum with a sanded finish. Gives
a nice finished look to your trunk.
It weighs about 5 pounds when completed. Shipping
is expensive due to the size of the package these ship in, no
way around that.
A FEW NOTES!
You guys with the totally stock Turbo Regals may not be
too crazy about this product as it does require you to drill
5 holes in the locations shown in the pic below to the
right. Us modified guys usually are not too concerned
about doing this but just want you to be aware before
ordering that this IS required. Various other methods
of trying to attach without drilling has been tried in the
harsh Las Vegas heat where these are manufactured and all
have failed. So no suggestions of using double sided
tape or Velcro. Has already been tried! Great
care must be taken to not damage the outer surface of the
trunk by drilling too far. We highly suggest putting a
section of vacuum hose over the drill bit so there is only
enough drill be showing to penetrate the attachment areas.
Plastic rivets that attach the Trunkskinz
5 locations where trunk needs to be drilled to
BACK SIDE SHOWING
Below is some info on the insulation used.
It IS installed on the Trunkskinz by the manufacturer.
All Trunkskinz are listed below in the
order box drop down menu.