|
SHIFTER HANDLES
We recently tried one of our shift knobs we make for the late model Camaros
on our 98 Jimmy and it works great. We now have a separate page for the
S-10 Pick ups and Blazers and hope to be adding more products if owners can think up any
items they may want for the S-10's.
|
Our shift knobs are second to none! Made from
solid billet aluminum, our shift knobs are available in 2" with a
tail. The pictures above from left to right show the knob
installed, the adapter installed on the stick and what the stick looks
like with the stock handle removed. This is literally a 5 minute
installation! Put your shifter in the low position and remove the
clip that holds the handle to the stick. A small screwdriver will
work fine. Once the stock handle is removed slide the adapter over
the stick with the allen screws positioned over the slots. Tighten
the allen screws until they are flush with the adapter. Screw the handle
on to the adapter until it is snug. Once installed the adapter is
totally hidden. To get the car out of park, all you have to do is
push down on the handle! The stock shifter can be reinstalled at any
time. If you order
one of the handles with a logo, shims are included so the logo will be
straight. Very
Important! You must also purchase the adapter separately for this
to work on your S-10. See the bottom of the page after you
select your shifter knob. |
|
|
|
Bowtie
Available Colors/Finishes:
Black, Red, Blue and Satin Anodized 2"
|
|
|
|
|
Plain
Available Colors/Finishes:
Black, Red, Blue and Satin Anodized 2"
|
|
|
REQUIRED SHIFTER
ADAPTER!
Click to see full size
View
Tech Sheet on Adapter
Only available in 2" knob size with tail, the tail hides the
adapter from view.
"Push Down" to shift
Easy installation
(requires 5/64" allen wrench)
(tool not included)
|
AUTOMATIC SHIFTER ADAPTER FOR S-10
Pickups/Blazers
This adapter allows push down to shift function. $15
|
|
|
Billet
OIL Dipstick Handles
Available Colors/Finishes:
Red Anodized, Blue
Anodized, Aluminum (Satin),
|
|
CHROME MASTER
CYLINDER COVER
Fits 82-97 S-10 & Blazer
Also Syclones and
Typhoons!
This billet aluminum master cylinder cover tapes over your existing
lid with supplied 3M double tape. Not a cheap plastic cover, it is
milled from aluminum, polished and then chrome plated. Shines like
a mirror!
Above picture shows one mounted on my 1987 Buick GN. It takes
the same cover as the S-10 / Blazers from 82-97.
Fits many other vehicles as well.
Click here for the list of all
applications.
CHROME
ALUMINUM MC COVER
$99
|
|
|
