
HI MARK, JUST
WANTED TO LET YOU KNOW YOU HAVE EXCELLENT PRODUCTS FOR THE GRAND
NATIONALS.I RECENTLY PURCHASED THE COLD AIR KIT WITH THE CHROME
MAF PIPE AND BOY DOES IT MAKE A DIFFERENCE IN PERFORMANCE AND
APPEARANCE, I HAVE ALSO PURCHASED THE SHIFTER HANDLE AND THE
COIL PACK PLATE, NICE UPGRADES TO IMPROVE YOUR GRAND NATIONAL…I
LOOK FORWARD IN PURCHASING OTHER PRODUCTS FROM YOU IN THE NEAR
FUTURE…KEEP UP THE GOOD WORK, PRODUCT, AND SERVICE…THANKS ANDY
GAMEZ

I just purchased
one of your new stock location stretch intercooler and my wife
just called to let me know the FedEx guy just dropped it off.
You have super delivery and I've purchased many items from you
and never been disappointed. I just wanted to drop a line to say
thanks.
Over the years I've
had this GN most vendors come off as know it alls or just plan
snotty or have terrible delivery. I just waited 6 months to have
my motor rebuilt waited 4 months for the tranny that didn't
work and the vendor wouldn't honor the warranty ended up buying
from another company seems like anything to do with these cars
is just a pain in the ass and I'm 50 years old and don't like to
be talked to like a kid. I never had a problem with your company
, your delivery is great and you carry quality products keep up
the good work.
Frank W Gillette

Hi Mark:
Almost always these days, if we hear from a customer, it's to
complain
about the product or service they received! It is all too
infrequent
that we get a message from the satisfied customer!
I am writing to tell you that I was EXTREMELY PLEASED with my recent
purchase of items from you for my Buick Grand National, and in
addition,
your service was IMPECCABLE!!! I don't know if you are doing this
as a
part time or full time job, but I would be proud to have you and
your
team working for Me!
The seat hinge overlays are super sharp, as are the pullstrap
screwcovers; one of mine was missing and yours were the perfect
solution...and so well designed and made! The coil pack plate as
well
far exceeded my expectations! Very sharp addition to the engine
compartment, yet subtle, so that the first people I showed it to
thought
that it was absolutely factory stock! Buick should have done it
first!
Then we get to the License Plate frame... I have already had three
inquiries as to where they could get one like it! Your cohorts did
an
excellent job on that as well. Needless to say, I am very pleased
with
the whole package, and the car will probably take first place at the
big
local show here next weekend!
Mark, if I can act as a reference for your products at any point in
the
future, please, by all means, direct your customers to me and I will
do
so. When I get some good weather, I will shoot some photos and
email
them to you...feel free to use them in your advertising. My GN is
an
'87 with 15,000 totally original miles, one owner, still in factory
paint (THERE'S A FIRST!!) and has only very slight performance mods...3"
downpipe, Hollow Cat, 2 1/2" stainless duals back to tuned
Supertrapps,
big MAF, GNX chip, internally beefed trans, GNX Wheels. Launches
straight as an arrow, and does a 12.7 1/4 mile on Eagle GT's!
Vettes,
'Stangs and Camaros always find a reason to turn off before the next
light! An occasional Viper will get excited, but fade away after I
pace them to the first light and then light 'em up before the second
one! The only real fun is an '89 Trans Am Turbo who comes out to
play
occasionally...he is about on par with me.
Mark, stay with it...you are great to do business with! Lyle Haws

Mark,
So far I have maxed out what I need from you. I will continue to
check you
site for new things. I just wanted to say thank you for all of your
help.
You have put the finishing touches on my car that are hard to find.
My car
has put on a whole new look. That exhaust motor still surprises
many people
who don't know what the GN's are. It is a blast at a cruise or next
to a
V8. Thank you so much.
Steve

These are excellent
products! I couldn't be happier! Please continue to keep up the
great work! Great shipping, perfect emails, I have never been so
happy with a product. Please continue the excellent work!
Genie Hunsinger

I received your custom
console kit today and I was VERY happy with it. The
custom work with engraving was exceptional!
Thank you,
Eric Herron

Mark:
I received the dash panels on Friday. I am extremely impressed with
them.
They were perfect in every way. I put them on my car immediately.
Everyone
else I have shown have been impressed with them as well. I am
willing to
give a testimonial to others if you ever want me to. I am going to
take a
few pics to show you how they turned out on my car. Thanks for your
efforts
with those.
Later!, Rob Reid

Mark,
I got the stuff today. I just want you to know that they are
Beautiful!! Much
better than I anticipated. Thanks and I will definitely be doing
more business with you,
Mike Moore

Hi Mark! Just wanted to
let you know that the passenger plate arrived today
in the mail. Thanks! I love it! Your stuff is the best around!
You'll be
hearing from me again soon!
Thanks again and have a great holiday weekend!
Genie

Mark, Thank you so much!
I received the custom passenger plate, and the
console kit, and the door handle set.
I got them in time, and my boyfriend loved them.
I am so happy with my purchase, and
I plan on ordering more for x-mas.
how far in advance should I plan for x-mas (this may
be a busy time for you guys.)
let me know
thanks again.
SARA

I received your custom
shifter handle with engraving and it just adds a touch of class to
my Grand National. Love your products! Please keep on making more
unique products for these unique cars!
Jonathan Cruz

I would like to say that
I was really
pleased with the shifter handle.
I was very happy with how easy it was to
install, I'm definitely going to be buying more!
Thanks again for getting to me before
Christmas.
Vince Morrissey

Hey Mark, I just wanted
to say that your console overlays and scanmaster
hoods are BEAUTIFUL. My father ordered them from you for XMAS and I
cant
tell you how pleased I am....now only if we could get the snow and
salt off
the roads so I can put the parts on my GN!!!:( Oh well, haven't
seen it in 2
months......just wanted to say thank you, and Ill be buying more
parts from
you in the future!!!!!
Neil Werner

Hi Mark
got the shifter handle today and
installed it.
Looks sweet
100% satisfied
Thanks
Steve Adams

Just wanted to drop you
a line, I received my MAF pipe today and it took me
a total of 13 minutes to install it! An absolute first-rate
product, my
deepest thanks and I look forward to doing business with you again!
Jim

Hey YOU GUYS ARE GREAT!!! I can't believe how quick you replied to
my message! Your customer service is wonderful, I actually fell
like you care about your customers. EVERY GN OWNER SHOULD COME TO
THIS SITE ITS AMAZING. I just got the console and shifter kits.
Amazing work you do. I'm really pleased. Thank you very much !
I'll send you some
pictures if you would like. Of the shifter and the console, both
look wonderful.
Thanks, Dylan

Mark,
I received the dash appliqué today. Let me just say that I am very
impressed. It matches the original very well. I have recommended
your site
to a fellow Buick enthusiast. Keep up the good work.
Ken

I
got my Big Mouth Kit and MAF pipe. They look and work great.
If this is the first time you've accommodated a TE44 then hats
off to you. Everything fits. It took a little time to get it
all perfect but I was able to do it with out cutting or changing
anything. The "Buick Motorsports" door handle inserts are
beautiful. I can't thank you enough, I hope that making my kit
helps you sell more of em'.

Mark,
Got my Big Mouth Cold Air Kit Installed and it went very smooth.
Instructions were good and the final result is excellent. I really
like the appearance and it lowered my intake air temp by more than
10 deg. In Florida that is very important. It was money well spent.
Steve Cornell

Got my Big Mouth
installed over the weekend. The install went just fine, no
modifications were necessary to the radiator support, I had
previously opened that area up a bit for my Tomka system. You're
right, that 4" coupler does look too big, but as you suggested,
it sealed up nicely.
It looks great with
that chrome pipe coming off the MAF. I don't think the beast
will ever be short of cold air again, 4" pre-MAF pipe into a 3
1/2" MAF sensor into a 3" MAF pipe. Yeah.....that should do it.
It is a very nice
piece Mark, and I thank you :-)
Lance E. Young

Mark, I just
wanted to let you know that I received my parts today. Thank
you for the fast shipment. I feel like you are doing what
all vendors should do, which is make a good quality part at
a very affordable price. Thanks for everything, I am very
happy!
Kyle

MessageType:
Praise
Subject: Products
SubjectOther: cold air big mouth for hot air
Username: Tony Mathews
UserEmail: gntony@yahoo.com
Comments:
Just a few lines to say this is one of the best products
that I have bought for the money. After installing this I
went for a test drive and you could feel a seat of the pants
improvement. I want to thank everyone involved. Those of
you who have not bought in to this, it is well worth the
money. My son has an 87 and he is going to buy one for his
87 GN. Thanks and keep coming up with these good ideas.
Tony Mathews

Hey Mark,
Already installed the cold air kit when I got home from the BBQ.
Made a
noticeable increase in performance and sounds awesome! Easy, quick
install
too. Good doing business with you, thanks!
Erik McNeice

Hello Mark, this is a
courtesy mailing to let you know that I received all of
my custom work. I will be in touch in a couple of months for some
more custom work. Thanks again for offering such unique products. I
will send before and after pictures when everything is finished.
Everything I received today is top notch.
God Bless America and all her children,
Bruce Russell
USN-retired

Hello and thanks for the
prompt shipment of the tri-shield door strap pull
covers. They are very nice and I love the quality. Keep up the great
work and
I plan to do business with you again soon.
Thanks, James Wood

Mark, I have installed
your cold air kit on my GN. I love it !
Your kit fits perfect, and really cleans up the look of my car. I
have
passed on the info to my friends..All they have to do is LOOK under
my
hood!!
Many thanks,
Richard
Williams

Great job!!! I just
received my dash kit and white face speedo.. They look awesome,
it's changed the whole feel of the car! I plan on sending some pics,
soon!! Thanx again!
Jason Shannon

Hi Mark,
Just thought you may like to know that your Big Mouth kit went 10.92@122.4
(at 1700' elevation) in my stock motored car a couple weeks ago. It
must
work!
Thanks again!
Mike Price

From the Turbo Buick
Message Board
Click here to see the
whole thread! http://www.turbobuick.com/forums/showthread.php?s=&threadid=23469
Hi All;
Since the board usually has its share of negative feedback regarding
vendors and products, I thought I'd share some very positive
feedback with the TR community regarding Mark Hueffman's Big Mouth
Cold Air Kit sold through his website - www.buickgn.com. Hopefully,
this will help others make more educated decisions when comparing
some of the cold air kits out there.
After trying a few different MAF pipes and looking at various cold
air/ram air kits, I ordered Mark's kit and installed it recently.
The quality is definitely top-notch, and Mark is always available to
answer questions about installation, etc.
Once installed, the fit is excellent. It's EXTREMELY rigid and
doesn't require drilling holes for brackets, etc. Though fitting it
does require some patience (as does any project on these cars),
there's plenty of wiggle room with the elbows and pipes supplied and
you end up with more than enough clearance from alternator bolts,
radiator hoses. I relocated my vapor canister about 1/2 inch towards
the fender leaving one screw in place and drilling another hole for
the second screw about 1/2 towards the fender. The filter sits level
with the lower left air dam, and can't be seen unless you get under
the car. Plus, it makes the car sound just wicked.
If anybody is interested in seeing a pic of the installation, let me
know. Otherwise, I would recommend Mark's cold air kit without
question. Good Job Mark!
Thanks,
Rich Cabelo
__________________
1987 WE4, 20k miles
Lightly "breathed-on"
Chips by Jim Testa

Got the (BIG MOUTH) kit
installed over the weekend. What a difference that thing made. I
was running about 16-17 psi of boost. I had to turn it down after I
installed the kit, it jumped up to 21psi!! That turbo really loves
all
the air its getting. Now if I could only keep it from sucking up
all
the critters I drive by on the side of the road. I'm really gonna
miss
my little dog !
Dave Throckmorton

wwwwwwwwwwwwwwwwooooooooooooooooooooowwwwwww!
Does that thing make
some sound when you get on it!
I don't even know
how describe it. Unique definitely. The real interesting part is
you don't even know its there until you stomp on it, and then
all heck breaks loose.
Installation wasn't
to bad. A little time consuming and some wrestling and
wiggleing,but it didn't make you pull your hair out or anything.
And as I said with the shifter the pictures just don't do it
justice. Your stuff looks way better in person.
Brian G

---Mark,
I received the big mouth kit today & it looks great!!!I'm just
waiting on my translator I just bought so that I can hook everything
up. I appreciate the super fast shipping!!!
Thanks again, Thomas

Hey Mark,
Just wanted to let you know that I installed the cold air kit
I bought from you today and I am very pleased with it. The sound is
nice since my car is so quiet and after a bit of finagling it slid
right in there. Thanks again for making such a nice product.
Matt Burns

Hey Mark, just wanted to
let you know I received my order from you the other
day and the quality of parts is exceptional. The engraving is
perfect, I
didn't know they were gonna look so good. All I can say is that you
have a
quality product you can be proud of. I went right out and put them
on my GN.
I'd recommend you to anybody. Keep up the good work. Thanks Tarey
D.
