TR Custom Parts
141 Ezra St
North Haven, CT 06473
We do all correspondence by email!

mhueffman@snet.net 

GENERAL INFO
Home Page
Ordering/Shipping/Returns
Comments
Customers' Cars

IMPALA  PRODUCTS
Impala HOODSKINZ

OLDS PRODUCTS
G-Body Oldsmobile

BUICK PRODUCTS
----------------------------------
AC RELATED PRODUCTS
AC Cowl Panel
AC Delete Plates

BODY RELATED 
Air Dams-One Piece
Headlight Covers
Hoodskinz

COLD AIR/MAF PIPES
Cold Air Kits
MAF/INLET Pipes
4" One Piece Air Inlet Kit
Up Pipes

FLUID / COOLING
Billet Fuel Rails
Billet Oil Filters
Dual Fan Kits
Power Steering Reservoir Kit
Radiator-Aluminum/Custom
Radiator Caps

Radiator Pipe Kits
RMI-25 Coolant Additive

EXHAUST PRODUCTS
3" Dual Exhaust- Stainless
4" Single Exhaust-Stainless
3" Internal Gate Downpipes
3" External Gate Downpipes
3.5" Downpipes
KB Style Headers

RemFlex Gaskets

EXTERIOR ITEMS
Door Handle Inserts
Lic Plates/ Frames

LED Lights
Wheelcap Overlays Custom

INTERCOOLERS / ETC.
Billet Vacuum Block

Intercoolers -Stock Location
Intercoolers -Front Mount
Intercooler Hoses/Clamps
Intercooler Plates
Intercooler Tags
Throttle Body/Plenum Combo

INTERIOR ITEMS
3rd Brake Overlays
Boost Controller Overlay

Console Door Overlays
Console Gear Indicator Plate
Console Overlays
Console Risers
Dashboard Kits

Door Trim Bar Inserts
Door Sill Plate Emblems
Gauge Panels
Gauge Pods
Glovebox 2 Step Mount

Glovebox Plate Overlay Stock
Glovebox Plates
Horn Buttons/Overlays
Pullstrap Screw Covers
Radio Delete Plates
Rear Seat Side Panels

Scan Master Shade Hoods
Seat Bracket Kits
Seat Hinge Overlays
Speedo Panel Kits
Switch Panels
Tach Overlays

MISCELLANEOUS
Alcohol Injection Kits
Bad Ass Fender Covers
Connecting Rods
Crankshafts ONLY
Flexplates
Fuel Pumps
Fuel Pressure Gauge Kits
Fuel Pressure Hood Bracket
Get Back Seat Brackets
Main Caps/Bearings/Stud Kits
Roller Rockers
Spark Plug Wires
Stock Crank Kits
Stroker Crank Kits
TR-6 Ignition Plate

Trunk Firewall Kit
Valve Cover Gaskets

MOTOR DRESS-UP
Aluminum Pulleys
Battery Cover
Coil Plates-Custom Engraved
Hot Air Intake Emblem
MAF Sensor PLATE
Plenum Spacer
Radiator Hold Down Plate

Translator Lid Overlay

Valve Covers

SUSPENSION / MOUNTS
Crossmember Mounts
Driveshaft Loop
Suspension G-Body
Rear Coilover Kits
Rear Coilover Bracket Kit
Rear Shock Tower Brace Kit
QA1 Regular Shocks
QA1 Coil Over Shocks

Motor Mounts
Rearend Cover
Rear Frame Notching Kit
Transmission Mounts

TURBO RELATED
Hot Air Turbo Heat Shield
Turbo Oil Drain Kit
Turbo Protector
Turbo Shields


Additional shipping charges may apply to Hawaii and Alaska orders

DASH PANEL OVERLAYS

SIMULATED ALUMINUM

Effective immediately, we will no longer offer clear-anodized aluminum. In it's place we will offer an imitation brushed aluminum/plastic material. It's very similar in appearance to clear anodized aluminum, and all engraving will be a high-contrast black.  Reasons for the change include: clear anodized aluminum is getting VERY expensive, it's difficult to work with, is sometimes inconsistent in appearance, and must be hand painted if black engraving is desired. We've been making Oldsmobile dashboard and other items for quite some time using the imitation aluminum with good results and reviews.

Main dashboard area in clear anodized aluminum

simalum1.jpg (93731 bytes)

simalum2.jpg (51547 bytes)

simalum3.jpg (83849 bytes)

Above are some pics of the SIMULATED aluminum dash kit as installed in my personal GN and some close up pics of the overlays before they are installed.  Please note!  These pics are taken with the protective plastic on the parts.  It is to be removed before installation.  That is why the edges look jagged. All the factory pinstriping and lettering for switch functions are engraved for a different look for your interior. Matches our console plate kit, radio area plate and glovebox plates perfectly.


OEM STYLE

  A pic of the OEM set, with just a touch of custom engraving! The Lower pieces can be made to your requirements, depending on what options your car has!    closeup of the lower right OEM piece. NOTE that the protective covering is still on this plate! 

Radio Area Overlay

oem radio panel.jpg (51556 bytes)

The OEM panels above faithfully duplicate the finish of your stock dash parts. Replace all or individual panels as needed. You can also add custom engravings like the left and middle photos above. The photo on the right still has the protective plastic covering on it.  Once peeled off the factory gloss finish is seen.

THIS ITEM IS AN OVERLAY ONLY!
DOES NOT INCLUDE ANY FACTORY PARTS.

NOW AVAILABLE AGAIN!

BLACK ANODIZED ALUMINUM DASH KITS!

We are bringing these back!  Now available again to match our black anodized console overlays and glovebox plates.  Order from the drop down menu.  These are harder to make so the price is a bit higher.


Main Dashboard Complete Kits
Order Below!

Prices $100.00 and up
Quantity 

SELECT YOUR DASHBOARD KIT BELOW

Click on the below factory options so we can make the proper panels for your dash kit. Very Important!  
Twilight Sentinel Option
Rear Defogger Option
Remote Right Mirror Option
My dash does NOT have any options

We can add up to 2 custom engravings to all dash kits. Click below to let us know how many engravings you need and then type in what and where you want them in the box below.
With 1 Custom Engraving - Add $12.50
With 2 Custom Engravings - Add $25.00
What custom engraving(s) do you want? 
Enter it in the box below!  Do NOT use " marks.


Individual Dash Parts & Radio Area Kits
Order Below!

Prices $10.00 - $55.00
Quantity

SELECT YOUR INDIVIDUAL DASH PIECES & RADIO AREA KITS BELOW


With Custom Engraving - Add $12.50 per logo

What custom engraving do you want? Enter it below!

DO NOT USE ANY QUOTATION MARKS!


ALKYCONTROL DASH PANELS!

Lower Left Side Panel

Left Side.JPG (592527 bytes)rightbaredash.JPG (609930 bytes) The two pictures to the left show what is behind the dash that you may have to cut. Left pic is the lower left panel and right pic is the lower right panel.  
alkyboxdisassembled.jpg (31297 bytes)alkyboxremoved.jpg (46841 bytes)

alkydashtrimming.jpg (43168 bytes)alkywithdefogandrightmirror.jpg (21958 bytes)

The four pictures to the left show how a customer installed his alky panel with the defroster and remote mirror.  Alky control mounts to the left of the defroster and looks like it was installed by the factory!  Upper left photo shows alky control box disassembled. Upper right shows control mounted into new panel without the box. Lower left shows trimming needed on the dash, this is covered by the new panel.  Lower right shows finished installation.

Here is a new way to mount your AlkyControl brand of controller. This is a picture of the lower right dash panel.  We can also do them in the lower left panel closest to the steering column as well.  You remove the nut and washers on the control box and use those to attach to our panel.  If you remove the stock panel from the dash, you will see cutouts in the plastic framing behind it.  You MAY have to do some trimming of the framing to provide clearance, we position the holes for the controller where the stock switches go.  The one pictured is approximately where the defrost  switch would normally be located if you have that option.  It can also be mounted more to the left.  On the lower left panel we can position it where the Twilight Sentinel switch would normally be, about 99% of the TR's out there don't even have that option but there is a space back there for it.  If you ever want to go back to stock we have the individual panels for the dash available as well.

Alky Controller dash panels!
Order Below!

Prices $20.00
Quantity

SELECT YOUR PANEL BELOW


VERY IMPORTANT!  We need to know what options you already have so we can engrave & drill the holes in the proper area!

Left panels we need to know if you have Twilight Sentinel option.
Right Panels we need to know if you have rear defroster and remote mirror options.  Enter that info in the box below.

DO NOT USE ANY QUOTATION MARKS!


 

 

 

NOTES

The dash overlay kits can be made to match the aluminum  console overlays, or made exactly as original, so your dash will look like new again! This kit is for the main instrument section of the dash only!  OEM pieces are available individually! We also offer a plate that goes over the plastic insert on the passenger side of the dashboard over the glove compartment. It is very nice looking and compliments the Dash Kit and the radio area plate kit that is also available. All are held in place with special double-backed tape. Change the whole look of your Turbo Regal interior.

ALL DASH BOARD KITS ARE SPECIAL ORDERS AND INCLUDE THE 5 PIECES THAT ARE ON THE MAIN PART OF THE DASH, LETTERING AND ENGRAVED PINSTRIPING IS STANDARD, SPECIAL ENGRAVINGS ALSO AVAILABLE.  THE RADIO AREA KITS ARE AVAILABLE SEPARATELY.

 

 

 

Acceptance Mark

Credit Cards accepted thru Paypal 
No need to have a Paypal account.
Click here to see how!

TR Custom Parts
141 Ezra St
North Haven CT 06473
We do all correspondence by email!
mhueffman@snet.net
or
trcustomparts@gmail.com

Site updated - 7/1/2017

WE ACCEPT PAYPAL, CREDIT CARDS THRU PAYPAL AND MONEY ORDERS FOR PAYMENT

Want to pay with your Credit Card?
You can use your Credit Card thru the Paypal site without having a Paypal account!
Just select the Paypal option for paying and you will see DON"T HAVE A PAYPAL ACCOUNT? Pay with your debit or credit card, or with Bill Me Later«
Just click on this link and you then enter your credit card information.
Safe & Secure, we never see your Credit Card information.

Click here to see how!

EFFECTIVE IMMEDIATELY!  ORDERS WILL ONLY BE SHIPPED TO BILLING ADDRESSES 
NO EXCEPTIONS!  
YOUR ADDRESS MUST ALSO BE PAYPAL VERIFIED!

DUE TO COMPLAINTS ABOUT THE HIGH COST OF SHIPPING TO CANADA WE WILL NO LONGER BE SHIPPING THERE!  SORRY

This is a part time business venture. Due to very limited time we prefer to do all business by email. Our phone number is NOT listed on the site. All emails about ordering and questions about our custom parts will be answered on a timely basis. Be sure to read our ordering/shipping page for details about how things work around here!

ęCopyright 2017 TR Custom Parts