New item! Protect your turbo with
one of our mini turbo oil filter kits. This special filter is
plumbed into the feed line before the turbo to ensure clean oil goes to
your turbo at all times. Can be disassembled and
cleaned.
The kit includes the following:
Special
inlet flange and bolts that attaches to turbo.
All
necessary fittings and -4 steel braided hose.
Clamp
to secure filter to turbo
Brass
block and adapters to connect to block
Mini
oil filter
Kit is sold with hoses
UNASSEMBLED!
We include plenty of -4 stainless steel hose so you can cut to length.
IMPORTANT!
Your turbo must have the holes drilled in the housing at the oil inlet
for our flange to fit on the turbo.
You will need to remove all the
connectors that are on the engine block as steel braided hoses use a
different connector than the stock brass block. Once our supplied
brass block and adapters are installed you can then put your oil
pressure sender on the addition port on our brass block. See
photos below on how I installed mine. I am using a downpipe with
an external wastegate so if you have one with an internal wastegate you
will have to mount the clamp to the other compressor side of the turbo
for clearance to the actuator.
