Great new item we are selling!  The power windows in our Turbo Regals and other G-Body cars are real slow and holding the button on the window switch is a pain.  We have these modules that convert your power windows to a window express one touch operation. They use the existing power window switches so no one will even know these are installed.   Unlike those previously sold by another vendor years ago, these go up AND down!  

They have a sensor that will stop operation when going up if an obstruction is encountered.  We do recommend keeping your hands and heads in the car when operating the window express!

Installation - You must remove the door panels to install the module in each door that you want the window express.  We do NOT supply and connectors with the modules as we feel the  proper way to install these is by soldering and heat shrinking or taping the connections.  If you choose to use butt connectors and quick connectors that is entirely your choice, it WILL work but I always like to solder connections myself.

Two wires going to your power window switch must be cut and four wires from the module go the ends of the wires you just cut.  One wire splices into the 12v power wire feeding the switch and then a ground wire goes to the door panel to an existing ground.  No hassle of going from the door into the main body of the car.  

The module is about the size of a pack of cigarettes and just tucks behind the door panel.  I replaced the old window express down only modules in my own GN with these and love them.  Our windows go up a lot slower than down and with the express up there is no more holding the button while pulling away from a toll booth!

Complete instructions with pictures will be included with the module/s. 

Operation once installed is easy.  Want the window down?  Touch the down button for the window you want to control for a fraction of a second and let go.  The window will go all the way down.  Want to stop it?  Just hit the button again and let go.  Window up?  Same thing, hit the up button for a fraction of a second and let go.  The switch will also work normally by just holding the button but why would you want to do that now?  LOL