OIL EVACUATION TANK

Our newest product.  It is focused on the serious racer who is trying to solve the oil puking out of their valve covers when they are pushing the big boost numbers.  Crank case vent hoses from the valve covers to the tank are not provided and neither are the fasteners.  What you receive is the tank, breathers and tank fittings only!

How this works.  Pressurized air out of the valve covers which is also carrying oil enters the side of the box.  This oil and air mixture has to pass through the aluminum vent holes, then through packed steel wool, then out the breathers on top the box.  The steel wool will absorb the oil that makes it up through the vented holes. This will prevent the oil from puking and spraying all over the engine bay.  A very common problem for cars that are pushing over 30 lbs of boost and sometimes much less boost.  They will come with a -8 drain cap that can be opened to release the excess oil the box traps.  The middle port is used to vent the transmission.  Can be plugged if you don't want to use it.  The inlet fittings are -12 size.

This is designed for those who have removed their AC system and are running an AC delete plate that we sell.  There is a pic of it mocked up on the AC plate below. 

Oil Evacuation Tank $295