We are now only using the email turboregalcustomparts@gmail.com  Thanks!
                                                   

TR Custom Parts
141 Ezra St
North Haven, CT 06473
We do all correspondence by email!

turboregalcustomparts@gmail.com

GENERAL INFO
Home Page
Ordering/Shipping/Returns
Comments
Customers' Cars
 

BUICK PRODUCTS
----------------------------------
AC RELATED PRODUCTS
AC Cowl Panel
AC Delete Plates

BODY RELATED 
Air Dams-One Piece
Headlight Covers

LED Headlight Kit

COLD AIR/MAF PIPES
Cold Air Kits
MAF/INLET Pipes
4" One Piece Air Inlet Kit
Up Pipes

FLUID / COOLING
Billet Oil Filters
Dual Fan Kits
Power Steering Reservoir Kit
Aluminum Radiator
Radiator Caps

Oil Evacuation Tank

EXHAUST PRODUCTS
3" Dual Exhaust- Stainless

3" Internal Gate Downpipes
3" External Gate Downpipes
Headers
RemFlex Gaskets

EXTERIOR ITEMS
Door Handle Inserts
Lic Plates/ Frames

Wheelcap Overlays

INTERCOOLERS / ETC.
Intercoolers -Stock Location
Intercoolers -Front Mount
Intercooler Plates
Intercooler Tags
Throttle Body/Plenum Combo

INTERIOR ITEMS
Console Door Overlays

Console Overlays

Alky Control Dash Panels
Lower Dash Panels
Glovebox Plate Overlay Stock
Glovebox Plates
Horn Buttons/Overlays
Pullstrap Screw Covers
Radio Delete Plates
Scan Master Shade Hoods
Seat Bracket Kits
Seat Hinge Overlays
Shifter Handles
Switch Panels

MISCELLANEOUS
Alcohol Injection Kits
Bad Ass Fender Covers
Connecting Rods
Crankshafts ONLY
Flexplates
Fuel Pressure Gauge Kits
Fuel Pressure Hood Bracket
Get Back Seat Brackets
IAC Angle Boss
Main Caps/Bearings/Stud Kits
Stock Crank Kits
Stroker Crank Kits

Throttle Body/Plenum
TR-6 Ignition Plate

Trunk Firewall Kit
Valve Cover Gaskets

MOTOR DRESS-UP
Aluminum Pulleys
Battery Cover
Coil Plates
MAF Sensor PLATE
Plenum Spacer
Radiator Hold Down Plate

Translator Lid Overlay

Valve Covers

SUSPENSION / MOUNTS
Crossmember Mounts
Driveshaft Loop
Suspension G-Body
Rear Coilover Kits
QA1 Coil Over Shocks

Motor Mounts
Rearend Cover
Transmission Mounts

TURBO RELATED
Turbo Oil Drain Kit
Turbo Protector
Turbo Shields



horizontal rule

HI MARK, JUST WANTED TO LET YOU KNOW YOU HAVE EXCELLENT PRODUCTS FOR THE GRAND NATIONALS.I RECENTLY PURCHASED THE COLD AIR KIT WITH THE CHROME MAF PIPE AND BOY DOES IT MAKE A DIFFERENCE IN PERFORMANCE AND APPEARANCE, I HAVE ALSO PURCHASED THE SHIFTER HANDLE AND THE COIL PACK PLATE, NICE UPGRADES TO IMPROVE YOUR GRAND NATIONAL…I LOOK  FORWARD IN PURCHASING OTHER PRODUCTS FROM YOU IN THE NEAR FUTURE…KEEP UP THE GOOD WORK, PRODUCT, AND SERVICE…THANKS  ANDY GAMEZ

horizontal rule

I just purchased one of your new stock location stretch intercooler and my wife just called to let me know the FedEx guy just dropped it off. You have super delivery and I've purchased many items from you and never been disappointed. I just wanted to drop a line to say thanks. 

 Over the years I've had this GN  most vendors come off as know it alls or just plan snotty or have terrible delivery. I just waited 6 months to have my motor rebuilt waited 4 months for the tranny  that didn't work and the vendor wouldn't honor the warranty ended up buying from another company seems like anything to do with these cars is just a pain in the ass and I'm 50 years old and don't like to be talked to like a kid. I never had a problem with your company , your delivery is great and you carry quality products keep up the good work.
 
Frank W Gillette

horizontal rule

Hi Mark:

Almost always these days, if we hear from a customer, it's to complain
about the product or service they received!  It is all too infrequent
that we get a message from the satisfied customer!

I am writing to tell you that I was EXTREMELY PLEASED with my recent
purchase of items from you for my Buick Grand National, and in addition,
your service was IMPECCABLE!!!  I don't know if you are doing this as a
part time or full time job, but I would be proud to have you and your
team working for Me! 

The seat hinge overlays are super sharp, as are the pullstrap
screwcovers; one of mine was missing and yours were the perfect
solution...and so well designed and made!  The coil pack plate as well
far exceeded my expectations!  Very sharp addition to the engine
compartment, yet subtle, so that the first people I showed it to thought
that it was absolutely factory stock!  Buick should have done it first!

Then we get to the License Plate frame... I have already had three
inquiries as to where they could get one like it!  Your cohorts did an
excellent job on that as well.  Needless to say, I am very pleased with
the whole package, and the car will probably take first place at the big
local show here next weekend!

Mark, if I can act as a reference for your products at any point in the
future, please, by all means, direct your customers to me and I will do
so.  When I get some good weather, I will shoot some photos and email
them to you...feel free to use them in your advertising.  My GN is an
'87 with 15,000 totally original miles, one owner, still in factory
paint (THERE'S A FIRST!!) and has only very slight performance mods...3"
downpipe, Hollow Cat, 2 1/2" stainless duals back to tuned Supertrapps,
big MAF, GNX chip, internally beefed trans, GNX Wheels.  Launches
straight as an arrow, and does a 12.7 1/4 mile on Eagle GT's!  Vettes,
'Stangs and Camaros always find a reason to turn off before the next
light!  An occasional Viper will get excited, but fade away after I
pace them to the first light and then light 'em up before the second
one!  The only real fun is an '89 Trans Am Turbo who comes out to play
occasionally...he is about on par with me.

Mark, stay with it...you are great to do business with!  Lyle Haws

horizontal rule

Mark,

So far I have maxed out what I need from you.  I will continue to check you
site for new things.  I just wanted to say thank you for all of your help. 
You have put the finishing touches on my car that are hard to find.  My car
has put on a whole new look.  That exhaust motor still surprises many people
who don't know what the GN's are.  It is a blast at a cruise or next to a
V8.  Thank you so much.

Steve

horizontal rule

 

 

These are excellent products!  I couldn't be happier!  Please continue to keep up the great work!  Great shipping, perfect emails,  I have never been so happy with a product.  Please continue the excellent work! 
Genie Hunsinger

horizontal rule

I received your custom console kit today and I was VERY happy with it.  The
custom work with engraving was exceptional!

Thank you,
Eric Herron

horizontal rule

Mark:
I received the dash panels on Friday.  I am extremely impressed with them.
They were perfect in every way.  I put them on my car immediately.  Everyone
else I have shown have been impressed with them as well.  I am willing to
give a testimonial to others if you ever want me to.  I am going to take a
few pics to show you how they turned out on my car.  Thanks for your efforts
with those.

Later!, Rob Reid

horizontal rule

Mark,
I got the stuff today. I just want you to know that they are Beautiful!! Much
better than I anticipated.  Thanks and I will definitely be doing more business with you,
Mike Moore

horizontal rule

Hi Mark!  Just wanted to let you know that the passenger plate arrived today
in the mail.  Thanks!  I love it!  Your stuff is the best around!  You'll be
hearing from me again soon! 

Thanks again and have a great holiday weekend!
Genie

horizontal rule

Mark, Thank you so much!
I received the custom passenger plate, and the
console kit, and the door handle set.
I got them in time, and my boyfriend loved them.
I am so happy with my purchase, and
I plan on ordering more for x-mas.
how far in advance should I plan for x-mas (this may
be a busy time for you guys.)
let me know
thanks again.
SARA

horizontal rule

I received your custom shifter handle with engraving and it just adds a touch of class to my Grand National.  Love your products!  Please keep on making more unique products for these unique cars!
Jonathan Cruz

horizontal rule

I would like to say that I was really
pleased with the shifter handle.
I was very happy with how easy it was to
install, I'm definitely going to be buying more!          
Thanks again for getting to me before
Christmas.
                              Vince Morrissey

horizontal rule

Hey Mark, I just wanted to say that your console overlays and scanmaster
hoods are BEAUTIFUL.  My father ordered them from you for XMAS and I cant
tell you how pleased I am....now only if we could get the snow and salt off
the roads so I can put the parts on my GN!!!:(  Oh well, haven't seen it in 2
months......just wanted to say thank you, and Ill be buying more parts from
you in the future!!!!!
Neil Werner

horizontal rule

Hi Mark
got the shifter handle today and
installed it.
Looks sweet
100% satisfied
Thanks
Steve Adams

horizontal rule

Just wanted to drop you a line, I received my MAF pipe today and it took me
a total of 13 minutes to install it!  An absolute first-rate product, my
deepest thanks and I look forward to doing business with you again!

Jim

horizontal rule

Hey YOU GUYS ARE GREAT!!!  I can't believe how quick you replied to my message!  Your customer service is wonderful, I actually fell like you care about your customers.  EVERY GN OWNER SHOULD COME TO THIS SITE ITS AMAZING.    I just got the console and shifter kits.  Amazing work you do.  I'm really pleased.  Thank you very much !  I'll send you some
pictures if you would like.  Of the shifter and the console, both look wonderful.          
                                                                             
Thanks, Dylan

horizontal rule

Mark,

I received the dash appliqué today.  Let me just say that I am very
impressed.  It matches the original very well.  I have recommended your site
to a fellow Buick enthusiast.  Keep up the good work.

Ken

horizontal rule

Hey Mark,

I got my Big Mouth Kit and MAF pipe.  They look and work great.  If this is the first time you've accommodated a TE44 then hats off to you.  Everything fits. It took a little time to get it all perfect but I was able to do it with out cutting or changing anything.  The "Buick Motorsports" door handle inserts are beautiful.  I can't thank you enough, I hope that making my kit helps you sell more of em'.

Thanks,

Clay "Nasty Wendy" cspottrun@msn.co

horizontal rule

Mark,
Got my Big Mouth Cold Air Kit Installed and it went very smooth. Instructions were good and the final result is excellent. I really like the appearance and it lowered my intake air temp by more than 10 deg. In Florida that is very important. It was money well spent.

Steve Cornell

horizontal rule

Hi Mark,

Got my Big Mouth installed over the weekend. The install went just fine, no modifications were necessary to the radiator support, I had previously opened that area up a bit for my Tomka system. You're right, that 4" coupler does look too big, but as you suggested, it sealed up nicely.

It looks great with that chrome pipe coming off the MAF. I don't think the beast will ever be short of cold air again, 4" pre-MAF pipe into a 3 1/2" MAF sensor into a 3" MAF pipe. Yeah.....that should do it.

It is a very nice piece Mark, and I thank you :-)

Regards,

Mile Hi GN

Lance E. Young

horizontal rule

Mark, I just wanted to let you know that I received my parts today. Thank you for the fast shipment. I feel like you are doing what all vendors should do, which is make a good quality part at a very affordable price. Thanks for everything, I am very happy!

Kyle

horizontal rule

MessageType:      Praise
Subject:          Products
SubjectOther:     cold air big mouth for hot air
Username:         Tony Mathews
UserEmail:        gntony@yahoo.com

Comments:

Just a few lines to say this is one of the best products that I have bought for the money.  After installing this I went for a test drive and you could feel a seat of the pants improvement.  I want to thank everyone involved.  Those of you who have not bought in to this, it is well worth the money.  My son has an 87 and he is going to buy one for his 87 GN.  Thanks and keep coming up with these good ideas.  Tony Mathews

horizontal rule

Hey Mark,

 Already installed the cold air kit when I got home from the BBQ. Made a
noticeable increase in performance and sounds awesome! Easy, quick install
too. Good doing business with you, thanks!

Erik McNeice

horizontal rule

Hello Mark, this is a courtesy mailing to let you know that I received all of
my custom work. I will be in touch in a couple of months for some more custom work. Thanks again for offering such unique products. I will send before and after pictures when everything is finished. Everything I received today is top notch.
                     God Bless America and all her children,
                                         Bruce Russell
                                                 USN-retired

horizontal rule

Hello and thanks for the prompt shipment of the tri-shield door strap pull
covers. They are very nice and I love the quality. Keep up the great work and
I plan to do business with you again soon. 
Thanks, James Wood

horizontal rule

Mark, I have installed your cold air kit on my GN. I love it ! 
Your kit fits perfect, and really cleans up the look of my car. I have
passed on the info to my friends..All they have to do is LOOK under my 
hood!!
                                                  Many thanks,
                                                            Richard Williams

horizontal rule

Great job!!!  I just received my dash kit and white face speedo..  They look awesome, it's changed the whole feel of the car!  I plan on sending some pics, soon!!  Thanx again!

Jason Shannon

horizontal rule

Hi Mark,

Just thought you may like to know that your Big Mouth kit went 10.92@122.4
(at 1700' elevation) in my stock motored car a couple weeks ago. It must
work!

Thanks again!
Mike Price

horizontal rule

From the Turbo Buick Message Board

Click here to see the whole thread! http://www.turbobuick.com/forums/showthread.php?s=&threadid=23469

Hi All;

Since the board usually has its share of negative feedback regarding vendors and products, I thought I'd share some very positive feedback with the TR community regarding Mark Hueffman's Big Mouth Cold Air Kit sold through his website - www.buickgn.com. Hopefully, this will help others make more educated decisions when comparing some of the cold air kits out there.

After trying a few different MAF pipes and looking at various cold air/ram air kits, I ordered Mark's kit and installed it recently. The quality is definitely top-notch, and Mark is always available to answer questions about installation, etc.

Once installed, the fit is excellent. It's EXTREMELY rigid and doesn't require drilling holes for brackets, etc. Though fitting it does require some patience (as does any project on these cars), there's plenty of wiggle room with the elbows and pipes supplied and you end up with more than enough clearance from alternator bolts, radiator hoses. I relocated my vapor canister about 1/2 inch towards the fender leaving one screw in place and drilling another hole for the second screw about 1/2 towards the fender. The filter sits level with the lower left air dam, and can't be seen unless you get under the car. Plus, it makes the car sound just wicked.

If anybody is interested in seeing a pic of the installation, let me know. Otherwise, I would recommend Mark's cold air kit without question. Good Job Mark!


Thanks,
Rich Cabelo
__________________
1987 WE4, 20k miles
Lightly "breathed-on"
Chips by Jim Testa

horizontal rule

Got the (BIG MOUTH) kit installed over the weekend.  What a  difference that thing made.  I was running about 16-17 psi of boost.  I had to turn it down after I
installed the kit, it jumped up to 21psi!!  That turbo really loves all
the air its getting.  Now if I could only keep it from sucking up all
the critters I drive by on the side of the road.  I'm really gonna miss
my little dog ! 

 Dave Throckmorton

horizontal rule

Cold air kit is in.

wwwwwwwwwwwwwwwwooooooooooooooooooooowwwwwww!

Does that thing make some sound when you get on it!

I don't even know how describe it. Unique definitely. The real interesting part is you don't even know its there until you stomp on it, and then all heck breaks loose.

Installation wasn't to bad. A little time consuming and some wrestling and wiggleing,but it didn't make you pull your hair out or anything. And as I said with the shifter the pictures just don't do it justice. Your stuff looks way better in person.

Brian G

horizontal rule

---Mark,
 I received the big mouth kit today & it looks great!!!I'm just waiting on my translator I just bought so that I can hook everthing up. I appreciate the super fast shipping!!!

                      Thanks again, Thomas

horizontal rule

Hey Mark,

       Just wanted to let you know that I installed the cold air kit I bought from you today and I am very pleased with it. The sound is nice since my car is so quiet and after a bit of finagling it slid right in there. Thanks again for making such a nice product.

Matt Burns

horizontal rule

Hey Mark, just wanted to let you know I received my order from you the other
day and the quality of  parts is exceptional. The engraving is perfect, I
didn't know they were gonna look so good. All I can say is that you have a
quality product you can be proud of. I went right out and put them on my GN.
I'd recommend you to anybody. Keep up the good work. Thanks  Tarey D.   

horizontal rule

 

 

Acceptance Mark

Credit Cards accepted thru Paypal 
No need to have a Paypal account.
Click here to see how!

TR Custom Parts
141 Ezra St
North Haven CT 06473
We do all correspondence by email!

turboregalcustomparts@gmail.com 

Site updated - 10/15/2024

WE ACCEPT PAYPAL, CREDIT CARDS THRU PAYPAL AND MONEY ORDERS FOR PAYMENT

Want to pay with your Credit Card?
You can use your Credit Card thru the Paypal site without having a Paypal account!
Just select the Paypal option for paying and you will see DON"T HAVE A PAYPAL ACCOUNT? Pay with your debit or credit card, or with Bill Me Later®
Just click on this link and you then enter your credit card information.
Safe & Secure, we never see your Credit Card information.

Click here to see how!

EFFECTIVE IMMEDIATELY!  ORDERS WILL ONLY BE SHIPPED TO BILLING ADDRESSES 
NO EXCEPTIONS!  
YOUR ADDRESS MUST ALSO BE PAYPAL VERIFIED!

DUE TO COMPLAINTS ABOUT THE HIGH COST OF SHIPPING TO CANADA WE WILL NO LONGER BE SHIPPING THERE!  SORRY

This is a part time business venture. Due to very limited time we prefer to do all business by email. Our phone number is NOT listed on the site. All emails about ordering and questions about our custom parts will be answered on a timely basis. Be sure to read our ordering/shipping page for details about how things work around here!

©Copyright 2024 TR Custom Parts